|
|
|
Starting is an easy affair; just press the power switch, thumb the KLX140L’s start button, and let the fun begin. Nobody likes a dead battery, so the power switch contains an internal LED which illuminates any time the power is on, this means there’s never a doubt when the ignition is active. The KLX’s accelerative performance can be attributed to the abundant power flowing from its air-cooled SOHC 144 cc engine through the five-speed, close-ratio transmission.
|
|
|
|
|
Its manual clutch offers young riders the chance to master full control over shifting. To promote an easy learning curve, the clutch features a spring damper that provides a progressive, two-stage engagement and facilitates half-clutch use while riding at extremely slow or idling speeds. Additional benefits of this system are a more direct lever feel and increased clutch durability.
|
|
|
|
|
The high-revving, yet quiet, engine is wrapped in a high-tensile steel perimeter frame that is covered by KX™-like shrouds and aggressive body work. The 140L’s controls, from the grips to the narrow footpeg and frame relationship combined with large footpegs that make it easier for the rider to move around with a minimum of effort complete the KX-inspired design theme.
|
|
|
|
|
Suspension duties are handled up front by a 33 mm fork with spring rate and damping settings specific to the KLX140L, while its aluminum shock includes a piggyback reservoir, fully adjustable preload, 4-way compression, and 22-way rebound damping to suit high speed operation by heavier riders.
|
|
|
|
|
RK EXCEL aluminum rims and high-grade die-cast hubs are another sign this is a serious off-road bike. A large 220 mm front disc and 27 mm twin-piston caliper at the front and a 186 mm rear rotor grace the KLX140L with serious stopping power. Both utilize petal shaped discs, which help clean the brakes and reduce unsprung weight for better performance.
|
|
|
|
|
Designed to be beginner and novice friendly with a roomy layout and enough performance to suit more-advanced riders, the KLX140L delivers an ideal blend of small stature and big potential that simply equals fun for kid to adult riders.
|
|
|
|
|
|
|
Reliable and easy to use lightweight engine is both simple to operate and to maintain
|
|
|
|
|
Bore and stroke of 58 x 54.4 mm
|
|
|
|
|
Engine revs easily and allows riders to use the full rpm range of the engine up to the rev limiter at 10,500 rpm
|
|
|
|
|
Exhaust pipe is curved to achieve optimum length for good power character yet remain unobtrusive
|
|
|
|
|
Quiet muffler is equipped with a USFS approved spark arrester, meaning the KLX140L can access designated public off-road riding areas
|
|
|
|
|
Oil-moistened air-filter is washable, reusable, easily accessed, and highly effective in dusty situations
|
|
|
|
|
|
|
Starting is via a (keyless) electric starter button on the handlebar
|
|
|
|
|
Orange LED light activates when the power button is depressed, indicating that power is “ON”
|
|
|
|
|
Digital CDI ignition helps ensure quick, reliable starting
|
|
|
|
|
|
|
Oval piston-valve Keihin PB20 carburetor features several Kawasaki-original modifications to provide stable fuel delivery under rough off-road conditions
|
|
|
|
|
Partitions in the float chamber keep the fuel from sloshing excessively and an umbrella around the main jet traps fuel when jumping
|
|
|
|
|
Dual air vents help provide a stable fuel supply and eliminate hesitation, even when the bike is at extreme lean angles
|
|
|
|
|
Needle valve is suspended on a spring which acts like a shock absorber
|
|
|
|
|
Float is rubber instead of plastic
|
|
|
|
|
|
|
Close gear ratios help the acceleration performance of the KLX
|
|
|
|
|
Like the KX™ models, the shift lever features a ball bearing to ease shifting, and has a folding tip for less damage in a crash
|
|
|
|
|
|
|
Manual clutch offers young riders the chance to master clutch engagement and gear shifting
|
|
|
|
|
A spring damper in the clutch gives it a 2-stage engagement that permits half-clutch use when riding at extremely low rpm or idling speeds and helps provide direct clutch feel and better durability
|
|
|
|
|
|
|
Ready for the off-road abuse, the highly rigid, KX-inspired high-tensile steel perimeter frame also uses the same upper tubes as the KLX250S
|
|
|
|
|
Aluminum swingarm offers light weight, strength, and a hairline finish like on the KX machines
|
|
|
|
|
KX-style chain adjusters allow precise adjustment of the chain
|
|
|
|
|
|
|
33 mm telescopic front fork has spring rates and damping settings specific to each model
|
|
|
|
|
Intended for a higher average speed, the KLX140L features a rear shock with piggyback reservoir with fully adjustable preload, 4-way compression damping, and 22-way rebound damping
|
|
|
|
|
|
|
Strong, high-grade die-cast hubs that offer the same durability as those found on the KX
|
|
|
|
|
Durable, lightweight RK EXCEL aluminum rims on the 19 inch front and 16 inch rear wheels
|
|
|
|
|
|
|
Front 220 mm petal disc and large-bore 27 mm twin-piston caliper (same size as those on the KX450F/250F) for strong and easy-to-control braking
|
|
|
|
|
Rear brake uses a 186 mm petal disc gripped by a 27 mm single-piston caliper
|
|
|
|
|
Rear brake master cylinder features a large-volume, unitized reservoir that contributes to stable braking, and helps ensure sufficient fluid pressure is maintained even when the brake pad wears down
|
|
|
|
|
In addition to helping reduce unsprung weight, the wave shapes of the petal discs help clean the brake pads for more efficient braking performance
|
|
|
|
|
|
|
Combination of the flat surface of the frame’s box-section, long footpegs mounted close to the bikes’ centerline, and no kick-start lever add up to good grip and a high level of machine control available to the rider
|
|
|
|
|
Footpeg and frame relationship is modeled after the KX for maximum leg grip
|
|
|
|
|
Handlebar is rubber-mounted for reduced vibration transferred to the rider’s hands
|
|
|
|
|
Two-piece upper triple clamp and handle clamp fosters easy aftermarket handlebar installation
|
|
|
|
|
Raised pattern on half of the surface of the grips just like the top-class MX racers
|
|
|
|
|
Two-tone seat cover has a slip-resistant top surface for good grip when seated and smooth sides for excellent rider mobility when standing
|
|
|
|
|
|
|
Box-section perimeter frame, with advanced styling similar to that found on the KX racers
|
|
|
|
|
Two-piece shrouds with ventilation holes inspired by the top-of-the-line KX race machines
|
|
|
|
|
Fuel tank cover provides a flush transition from tank to shroud and contributes to the high level fit and finish
|
|
|
|
|
Eye-catching box muffler design protrudes as little as possible from behind the side cover and features a plastic muffler end-cap that offers a surface cooler to the touch than steel
|
|
|
